About

section-7f5004f
https://www.hookyspanelshop.com/wp-content/uploads/2020/07/michael-mongin-_PkmD2yYYHs-unsplash-530x530.jpg

welcome to
Hookys Panel Shop

I began welding bugs back in the early 80's and have been through more Mig wire & gas bottles than i care to remember. Over this period of time i have built up a good knowledge of the in's & out's of Beetle construction. Anyone whose been involved in the repair or restoration of a Beetle will tell you that the aftermarket panels that are available can leave quite a lot to the imagination (and the angle grinder!!).

It's to this end that i began producing my own panels to overcome this lack of quality/unavailability. Hooky's Panel Shop was formed in 2000, with two main priorities- 'Quality' and 'Fit', saving the restorer time in fitting the panel and producing a better end result.

I will be adding more panels to the currently modest range in the future. Watch this space!

Contact Us

Our Newsletter

By subscribing to our mailing list you will always be updated with the latest news from Hooky's Panel Shop.